Introduction
The Panasonic PT-RW730LWE is a multimedia installation projector that works with the 1-chip DLP laser phosphor technology. One advantage of laser technology is the maximum runtime of the light unit of 20,000 hours. The projector is white and does not come with a standard lens. A range of optional interchangeable optics is available to the projector for a more flexible setup. The WXGA projector also covers the HD ready area, which qualifies it for the playback of digital content. The light output of the projector is 7,000 lumens, and the dynamic contrast at 10,000: 1. The Panasonic PT-RW730LWE offers DIGITAL LINK technology, image enhancement technologies, and the projector allows a vertical and horizontal 360-degree installation.
Image Technology
The Panasonic PT-RW730LWE projector uses the 1-chip DLP laser phosphor light technology, with which a runtime of up to 20,000 hours is possible. The projector’s brightness is quite high 7,000 lumens contrast generates the dynamic iris with a value of 10,000: 1. If you use the projector in rooms with daylight, the System Daylight View 2 technology comes into play.
Regardless of this, the Panasonic PT-RW730LWE projector offers different projection modes, offering natural color reproduction and white balance. The Panasonic PT-RW730LWE offers the WXGA resolution with 1,280 x 800 pixels, and the native format is at 16:10. With the Detail Clarity Processor 3, the image gets more sharpness and clarity in the details. The projector offers a dust-proof construction with an airtight optical block, whereby the double optical laser unit enables reliable continuous operation with failover protection.
Control & Connections
If you want to operate the projector over long distances during installation, you can use the DIGITAL LINK technology. The connection established with an appropriate network cable and a distance of up to 100 meters can achieve. With DIGITAL LINK technology, you can transmit uncompressed Full HD videos and Ethernet / RS-232C control commands. The Panasonic PT-RW730LWE conveniently positioned for the connections. It has the following interfaces: 1 HDMI in, 1 x DVI-D in, 1 x D-sub 15pin in, 5 x BNC RGBHV in, 1 x RS232C Din 9 pin in, 1 x RJ45 in (DIGITAL LINK).
Low Power Consumption
Laser light source projectors have lower power consumption and therefore generate less heat. The cooling system designed with no built-in filters that require maintenance, which significantly reduces the projector’s cost of ownership. The projector can be installed in hard-to-reach places and at an angle to the projection surface.
The lens’s central location, the function of correcting keystone distortions in the horizontal and vertical direction, the ability to shift the projection vertically and horizontally (when using a motorized lens) allow the projector to installed in different planes at different angles. The laser light source will enable you to project the image in any direction 360 ° and tilted. Due to the absence of a lamp and filter, the projector can install in hard-to-reach (unattended) places.
Reviews
There are no reviews yet.